Traxxas Erevo TXX71076-3-BLUEX model car 1:16 vxl brushless 4wd tqi tsm - bluex

One of the most identifying aspects of the E-Revo is the "pushrod" type suspension system, re-applied in this case in 1:16 scale, keeping the oil shock absorbers with threaded bodies for the compression ring of the springs. All these technical details allow you to set up the car in a very accurate and precise way even if on a small scale, thus maintaining high performance! As well as the larger scale model, this E-revo 1:16 is also characterized by a molded plastic frame in one piece, which thus allows you to have a perfect balance between strength and weight, details that are difficult to find on a model car. of such small size.

SOME FEATURES OF THE E-REVO 1:16 VXL (71076-3)

TSM - Traxxas Stability ManagementTM

Battery included NiMh Traxxas Power Cell with iD® connector

Fast peak 12v charger included

2.4ghz TQi Radio and Receiver

Approximately 50 Kmh of speed with the battery

Approximately 80 Kmh of speed with optional batteries

Pushrod suspension for maximum performance and control

4wd transmission

Velineon® 380 Brushless motor

Waterproof Electronics

Torque-control ™ pull-guard clutch

Sealed differentials

All-terrain tires with foam inserts

The fastest in its category!

Other smaller scale model cars are still fast despite being small, but that wouldn't be enough for a Traxxas model! In fact, the E-Revo 1:16 was designed to be the fastest in its entire category. Already with the included NiMh battery as standard it is almost twice as fast as any other model in the same category. By installing an optional battery, it can even exceed 80kmh, an almost uncontrollable speed for a 1:16 scale model car. No other model of this scale offers the possibility of achieving such performance and being able to wheelie easily even at high speed, fun is guaranteed with the Traxxas E-Revo 1:16 Brushless!

Power of the Velineon Brushless electronic system!

The Velineon VXL-3m regulator and 380 engine have been specially made for Traxxas 1:16 scale model cars with the latest modern technology. The Velineon system is perfectly compatible with both NIMH batteries and Lipo 2s and 3s batteries, and already has the Lipo "Low voltage detection" as standard, useful for preserving the life of Lipo batteries. The motor is assembled with high smoothness bearings, with the "Sintered" rotor, powerful Neodymium magnets and 3.5mm gold connectors for maximum conductivity.

These characteristics allow the engine to exceed 50,000 rpm!

The Traxxas E-Revo 1:16 VXL is fully assembled at the factory with the 2.4 ghz TQi radio system, the Brushless Velineon electronic system, with the body already painted and decals applied, tires and rims already glued, battery and charger included! In this way the Traxxas E-Revo 1:16 VXL can be considered 100% RTR (Ready To Run)! Like all Traxxas models, the E-Revo 1:16 is made up of many parts that can be purchased as a separate spare, allowing you to carry out service and maintenance in the best possible way.

Data sheet

Length 328 Mm

Width 239 Mm

Total height 117 Mm

Product Weight 1.09 Kg

Step 202 Mm

Front Shock Absorbers Length 48 Mm

Length Rear Shock Absorbers 48 Mm

48dp Transmission Module

Maximum speed 90+ Kmh

Velineon® VXL-3m ESC Waterproof Electronic Controller

Voltage 6 To 12 Cells NiMH, 2S To 3S LiPo

Traxxas ID Connector Type

Velineon® 380 Brushless motor

Heavy-Duty Single Speed Transmission

2.4GHz TQi Radio System W / Traxxas Stability Management®

Skill Level 2

12mm Hexagonal Driver